SGCE Galvanized Steel Sheet 1mm 3mm 5mm 6mm Good Quality Steel Plate
GI steel sheets are sheets made of galvanized iron (GI). Galvanization is the process of coating iron or steel with a layer of zinc to prevent corrosion. GI sheets are commonly used for roofing, fencing, and outdoor applications due to their durability and resistance to rust and corrosion.
The thickness of GI sheets is measured in gauge, with a lower gauge indicating a thicker sheet. The most common gauges for GI sheets range from 18 to 24. The width of GI sheets typically ranges from 600mm to 1500mm.
Galvanized Steel Plate are available in two types of coating: regular spangle and zero spangle. Regular spangle GI sheets have a visible spangle-like pattern on the surface, which is created during the galvanizing process. Zero spangle GI sheets, on the other hand, have a smoother surface and do not have any visible spangle pattern.
Galvanized Steel Sheet can also be classified based on their uses. Some of the common types of GI sheets include:
1. Corrugated GI Sheets - used for roofing, wall panels, and fencing.
2. Plain GI Sheets - used for indoor applications such as ducting, electrical panels, and furniture.
3. Galvalume GI Sheets - a combination of aluminum and zinc-coated GI sheets that provide superior corrosion resistance.
4. Pre-painted GI Sheets - GI sheets coated with a layer of paint, commonly used for roofing and cladding applications.
GI sheets are available in various grades based on their strength and durability. The most commonly used grades for GI sheets are SGCC, SGHC, and DX51D.
1. Corrosion resistance, paintability, formability and spot weldability.
2. It has a wide range of uses, mainly used for parts of small household appliances that require good appearance, but it is more expensive than SECC, so many manufacturers switch to SECC to save costs.
3. Divided by zinc: the size of the spangle and the thickness of the zinc layer can indicate the quality of the galvanizing, the smaller and thicker the better. Manufacturers can also add anti-fingerprint treatment. In addition, it can be distinguished by its coating, such as Z12, which means that the total amount of coating on both sides is 120g/mm.
GI sheets have a variety of applications in different industries and sectors. Some of the common applications of GI sheets are:
1. Roofing and Cladding: Hot Dip Galvanized Steel Plate are a popular choice for roofing and cladding applications due to their durability, corrosion resistance, and strength. They are commonly used in residential, commercial, and industrial buildings.
2. Fencing: GI sheets are used for creating fences and partitions due to their strength and rust-resistance properties. They are also used as boundary walls for security purposes.
3. Automotive: GI sheets are used for manufacturing automotive parts such as body panels, roofs, and chassis due to their strength and durability.
4. HVAC: GI sheets are used in the heating, ventilation, and air conditioning (HVAC) industry for ducting, air conditioning units, and ventilation systems.
5. Fabrication: GI sheets are used in the fabrication industry for manufacturing various products such as cabinets, shelves, furniture, and other metal products.
6. Electrical: GI sheets are used for manufacturing electrical enclosure panels due to their durability, strength, and corrosion resistance.
7. Agriculture: GI sheets are used in agriculture for building poultry sheds, greenhouses, and storage units.
Overall, GI sheets offer a reliable and cost-effective solution for many applications and are widely used in numerous industries and sectors.
|
Technical Standard
|
EN10147, EN10142, DIN 17162, JIS G3302, ASTM A653
|
|
Steel Grade |
Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440,
SGH490,SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); or Customer’s Requirement |
|
Thickness
|
customer's requirement
|
|
Width
|
according to customer's requirement
|
|
Type of Coating
|
Hot Dipped Galvanized Steel(HDGI)
|
|
Zinc Coating
|
30-275g/m2
|
|
Surface Treatment
|
Passivation(C), Oiling(O), Lacquer sealing(L), Phosphating(P), Untreated(U)
|
|
Surface Structure
|
Normal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS)
|
|
Quality
|
Approved by SGS,ISO
|
|
ID
|
508mm/610mm
|
|
Coil Weight
|
3-20 metric ton per coil
|
|
Package |
Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by
seven steel belt.or according to customer's requirement |
|
Export market
|
Europe, Africa, Central Asia, Southeast Asia, Middle East, South America, North America, etc
|
| Gauge Thickness Comparison Table | ||||
| Gauge | Mild | Aluminum | Galvanized | Stainless |
| Gauge 3 | 6.08mm | 5.83mm | 6.35mm | |
| Gauge 4 | 5.7mm | 5.19mm | 5.95mm | |
| Gauge 5 | 5.32mm | 4.62mm | 5.55mm | |
| Gauge 6 | 4.94mm | 4.11mm | 5.16mm | |
| Gauge 7 | 4.56mm | 3.67mm | 4.76mm | |
| Gauge 8 | 4.18mm | 3.26mm | 4.27mm | 4.19mm |
| Gauge 9 | 3.8mm | 2.91mm | 3.89mm | 3.97mm |
| Gauge 10 | 3.42mm | 2.59mm | 3.51mm | 3.57mm |
| Gauge 11 | 3.04mm | 2.3mm | 3.13mm | 3.18mm |
| Gauge 12 | 2.66mm | 2.05mm | 2.75mm | 2.78mm |
| Gauge 13 | 2.28mm | 1.83mm | 2.37mm | 2.38mm |
| Gauge 14 | 1.9mm | 1.63mm | 1.99mm | 1.98mm |
| Gauge 15 | 1.71mm | 1.45mm | 1.8mm | 1.78mm |
| Gauge 16 | 1.52mm | 1.29mm | 1.61mm | 1.59mm |
| Gauge 17 | 1.36mm | 1.15mm | 1.46mm | 1.43mm |
| Gauge 18 | 1.21mm | 1.02mm | 1.31mm | 1.27mm |
| Gauge 19 | 1.06mm | 0.91mm | 1.16mm | 1.11mm |
| Gauge 20 | 0.91mm | 0.81mm | 1.00mm | 0.95mm |
| Gauge 21 | 0.83mm | 0.72mm | 0.93mm | 0.87mm |
| Gauge 22 | 0.76mm | 0.64mm | 085mm | 0.79mm |
| Gauge 23 | 0.68mm | 0.57mm | 0.78mm | 1.48mm |
| Gauge 24 | 0.6mm | 0.51mm | 0.70mm | 0.64mm |
| Gauge 25 | 0.53mm | 0.45mm | 0.63mm | 0.56mm |
| Gauge 26 | 0.46mm | 0.4mm | 0.69mm | 0.47mm |
| Gauge 27 | 0.41mm | 0.36mm | 0.51mm | 0.44mm |
| Gauge 28 | 0.38mm | 0.32mm | 0.47mm | 0.40mm |
| Gauge 29 | 0.34mm | 0.29mm | 0.44mm | 0.36mm |
| Gauge 30 | 0.30mm | 0.25mm | 0.40mm | 0.32mm |
| Gauge 31 | 0.26mm | 0.23mm | 0.36mm | 0.28mm |
| Gauge 32 | 0.24mm | 0.20mm | 0.34mm | 0.26mm |
| Gauge 33 | 0.22mm | 0.18mm | 0.24mm | |
| Gauge 34 | 0.20mm | 0.16mm | 0.22mm | |
1. What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact
us for further information.
2. Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
3. Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4. What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 5-20 days after receiving the deposit payment. The lead times become effective when
(1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5. What kinds of payment methods do you accept?
30% in advance by T/T, 70% will be before shippment basic on FOB; 30% in advance by T/T, 70% against the copy of BL basic on CIF.
-
China factory direct galvanized pipe price conc...
-
SS400 Steel Galvanized Angle Iron Mild Steel Eq...
-
Top quality DX51D + Z SPCC SGCC GI coil GSM180 ...
-
Zinc Coated Hot-dipped 1/2 Inch Galvanized Stee...
-
Hot-Selling High Quality Galvanized Steel Roof ...
-
High Quality Gi Galvanized Steel Iron Pipe Stee...
