Cold Rolled ST37 Galvanised Steel H HEA Beam Zinc Coating
H Beam Steel Price is a new economic construction. The section shape of H beam is economical and reasonable, and the mechanical properties are good. When rolling, each point on the section extends more evenly and the internal stress is small. Compared with ordinary I-beam, H beam has the advantages of large section modulus, light weight and metal saving, which can reduce the building structure by 30-40%. And because its legs are parallel inside and outside, the leg end is a right Angle, assembly and combination into components, can save welding, riveting work up to 25%.
H section steel is an economic section steel with better mechanical properties, which is optimized and developed from I-section steel. Especially, the section is the same as the letter "H"
Features
1.Wide flange and high lateral stiffness.
2.Strong bending ability, about 5%-10% than I-beam.
3. Compared with welded Galvanized Steel H Beam, it has low cost, high precision, small residual stress, no need for expensive welding materials and weld inspection, saving about 30% of steel structure manufacturing cost.
4. Under the same section load. The hot-rolled H steel structure is 15%-20% lighter than the traditional steel structure.
5. Compared with the concrete structure, the hot-rolled H steel structure can increase the usable area by 6%, and the structure's self-weight can be reduced by 20% to 30%, reducing the internal force of the structure design.
6. H-shaped steel can be processed into T-shaped steel, and honeycomb beams can be combined to form various cross-sectional forms, which greatly meet the needs of engineering design and production.
Application
H beam is often used in large buildings (such as factories, high-rise buildings, etc.) that require large bearing capacity and good section stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, brackets, foundation piles,etc.
Parameters
| Product name | H-Beam |
| Grade | Q235B, SS400, ST37, SS41, A36 etc |
| Type | GB Standard, European Standard |
| Length | Standard 6m and 12m or as customer requirement |
| Technique | Hot Rolled |
| Application | Wide used in various building structures, bridges, vehicles, bracker, machinery etc. |
Samples
1. What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact
us for further information.
2. Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
3. Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4. What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 5-20 days after receiving the deposit payment. The lead times become effective when
(1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5. What kinds of payment methods do you accept?
30% in advance by T/T, 70% will be before shippment basic on FOB; 30% in advance by T/T, 70% against the copy of BL basic on CIF.
